Getting The Chemistry Of Your Hot Tub Just Right

The expenses do not stop right after you have installed your hot tub. Constant usage implies that certain chemical products are added to the water, to keep its properties constant, such as pH, purity and total hardness.
These chemistry concepts are not that confusing, however. For a start, the pH must be tested with a special strip. If the water is too acidic, pH increaser must be added. In the same manner, pH decreaser is employed if the water is too alkaline. The ideal pH level is in the range of 7.2 and 7.8. But be careful, pH is not to be confused with total alkalinity, for whose adjustment you should use sodium bicarbonate if it is too low or pH reducer if it is too high.
Apart from these, another essential product you must use is the sanitizer, which combats algae and bacteria. The most popular substances are chlorine and bromine. Like the pH level, these require manual tests to ensure their concentration is right.
Shock treatments, which remove the residue that forms over time, can be achieved by using chlorine or non-chlorine treatments.
If there are any doubts, do not hesitate to ask your supplier for advice. This guide, however, might be all that you need to properly balance your hot tub water.  For hot tubs that do not require chemical use, look to https://windriverspas.com/.
Original Post over here: Getting The Chemistry Of Your Hot Tub Just Right